Dicey Jayne Productions / The Bench

That's right.. It's The Bench.

Nothing fancy here folks. Just some behind the scenes

shots of projects that are currently in the works. And

believe me when I tell you, we always have something

to keep us busy around here…

THE BENCH

Here are some shots of our C3P0 as we found him on eBay.
This had been a Cris Adrian kit that had just gotten off to a
bad start.

The neck and shoulder rings had been damaged beyond repair, so we created new ones.
The Torso had also been over trimmed to the point it no longer fit together properly.
It would require spacers and filler to correct.

After applying a plastic filler, sanding, and then spraying the parts with a white primer 3P0 starts
to take shape.

After the final assembly of the Head and Torso we shot the whole piece in silver. This will
make a nice base for the gold that comes later. NEXT: Arms.

Here are some photos of our custom Han Solo in
Carbonite using a pull from the front of an Illusive
Concepts casting.

Once completed IG-88
will stand over 7 feet tall.

Work is just being started
on the Ark. First we will
construct the lid. Plywood
will be used as the heart of
the structure. This will provide
a good solid foundation for
attaching detail pieces.

The tri-layer sections of ply
reflect what will later become
the contours of our ark lid.

PVC spacers were cut and used
to establish proper distance
between the ply sections.

Before applying glue to attach
the lid skins, the styrene parts
must first be cleaned to remove
any oil or dust residue.

The top and bottom skins
are then cemented to our
lid formers using liquid nails.

The seam will later be filled
with Bondo.

Now that’s starting to look like
the Ark.